BILLIG FRAKT till Sverige - från 90 SEK
LÄS MER
BILLIG FRAKT till Sverige - från 90 SEK
LÄS MER
Logga in
| Electrical | 230v 50Hz single phase input, 3 phase output |
| Motor | Induction, 1420 RPM, 2Hp. P2 = 1.5Kw S1 |
| VFD | Delta S1 Variable Frequency Drive |
| Belt | Poly-Groove Drive Belt with easy access |
| Recommended Breaker | 15 Amp |
| Swing over bed | 457mm (18") |
| Max. Outboard Swing | 813 mm (32") |
| Swing over Banjo | 343 mm (13 ½”) |
| Distance between Centers | 914 mm (36”) |
| Steel Bed | ASTM A36 |
| Toolrest size / Post Size | 305 mm (12") / 25.4mm (1”) |
| Spindle Taper | MT#2 |
| Spindle Thread | M33 x 3.5 mm Right hand thread |
| Speed Range High | 135-3500 RPM |
| Speed Range Low | 50-1300 RPM |
| Tailstock Quill Travel | 114mm (4 ½”), Engraved, Self-Ejecting |
| Floor to Spindle Center | 1054 mm (41 ½”) w Pads |
| Floor to Bed Height | 826mm (32 ½") w pads |
| Front Bearing | TPI Taiwan 6207LLU |
| Rear Bearing | TPI Taiwan 6205LLU |
| Spindle Index # | 14/36/48 positions with Lock |
| Headstock Through-Bore | 9.5mm (3/8”) |
| Headstock Travel | Full Length |
| Tailstock Through-Bore | 9.5mm (3/8”) |
| Storage | Tailstock Storage of centers |
| Floor Space W x D x H | 1524 mm x 660 mm x 1194 mm (60” x 26” x 47”) |
| Weight (Net /Shipped) | 194 Kg / 206 Kg |
Tillverkare: Laguna
Du kommer få 870.876 rabattpoäng
Beräkningarna är baserade på Grenkes leasingprislista, som inte inkluderar försäkring. Försäkring är obligatorisk och kunden kan antingen köpa sin egen försäkring eller ta ut den med samma kontrakt. Leasingfinansiering beviljas endast till företag med giltigt FO-nummer.
Leasingperiod 12-72 månader.
Leasingpriser är moms 0.
Möjlighet att lösa in i slutet för ditt eget slutliga leveranspris, vilket kommer att visas under produkten och i sammanfattningen. Det lägsta slutliga leveranspriset är 70 € moms 0.
Efter att du har gjort en beställning med leasingfinansiering får du inom 1-2 dagar via e-post kontrakten för elektronisk signatur.
Om du vill använda din egen försäkring kommer leasingbolaget att kräva ett försäkringsintyg som visar följande:
We are pleased to be introducing this highly acclaimed lathe into Europe. The First feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals that this is no ordinary lathe.
The bed is made from steel which allows the cast iron head stock and banjo to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.
Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque.
The digital read out gives you an accurate RPM readout at all times any fine adjustments are made electronically.
Changing from high to low settings is made easy by using the quick release handle. The head stock & tail stock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.
There are a range of optional accessories also available to further increase the capabilities of this lathe.
Stability, quality and power are the hallmarks of this superb lathe and we highly recommend viewing it in the flesh at one of our appointed 'Lathe Specialists' - these experienced retailers are indicated with a lathe icon in our stockist section.
100% pålitlig webbutik med historia
Expert kundservice
Snabba leveranser
Stort urval direkt från lager
Inga mellanhänder - spara på priset
Suomeksi
In English
Lägg i köpkorgen
